Description
DESCRIPTION
The optimal choice to broaden cutting capabilities
Cost-effective
The AT series minimizes the need for multiple machines by offering sheet and tube-cutting capabilities in a single unit. It is the optimal choice for the best cost-effectiveness.
Easy cutting
The remnants layout and the cutting parameter auto-match help you simplify the cutting process, effortlessly transforming you into a cutting master.
Efficient production
With a fast transmission speed and a high-performance bus servo motor boasting leading dynamic performance, the AT Series significantly increases processing efficiency, allowing you to achieve efficient production.
Cutting Parameter Auto-Match
Visual comparison of sample parts and cutting parameter auto-match enhance cutting quality, and reduce labor costs.
Craftsmanship Shines in Precise Production
The wiring harness assembly is neat and orderly, greatly reducing machine failures and safety hazards caused by disordered wiring. The lifetime maintenance-free rate reaches as high as 98%*, achieving quality and efficiency improvements for you.
The 3rd-Generation Mortise-and-Tenon Welding Bed Frame
The rigidity of the bed frame increased by 30%, and the structural strength enhanced by 25%.
*Data obtained from laboratory analysis
30%↑ Overall Performance
Note: The “Overall Performance Improved by 30%”
mentioned above is relative to Bodor’s previous-generation product.
1.5G Max. Acceleration
It adopts high-performance bus servo motors to achieve the absolute leading dynamic performance (compared with similar products in the market), significantly improving processing efficiency to ensure that every second you invest creates value.
Aerospace Aluminum Beam
Weight 30%↓
Structural Strength 25%↑
Laser Head
Intelligent Collision Avoidance
Self-developed servo-following sensors and path avoidance algorithms reduce the risk of laser head collision significantly.
Pioneering Modular
Worktable Structure reduces maintenance costs, ensuring safety and convenience.
Fast Pneumatic Chucks
The pneumatic chucks adopt a direct cylinder push structure. With simple and efficient transmission, it can complete clamping in as fast as 2 seconds. It is easy to disassemble and maintain.
Over Edge Protection
Self-developed servo-following sensors and path avoidance algorithms can accurately sense obstacles in real-time at 360° in the position changes of the tube edges.
Sheet Edge Anti-Vibrating
The powerful algorithm empowers the AT Series to adapt to the high-frequency vibration of thin sheets caused by air pressure, guaranteeing consistently stable cutting.
Bodor +
Bodor+ includes comprehensive services such as auxiliary operations, shared processes, real-time equipment monitoring, regular maintenance reminders, an online accessory store, and one-click fault reporting.
Mineral Cast Anti-Burn Plate
The mineral cast anti-burn plate is heat-resistant and non-conductive, making the machine less prone to deformation, easy to clean, and ensuring a long lifespan.
5-Year Warranty
Proprietary Core Technologies for Ultimate Reliability
Innovation Powered from Within
Bodor has invested years of research and development into creating its own core optical components, resulting in three groundbreaking technologies: the BodorPower laser source, the BodorGenius laser cutting head, and the BodorThinker intelligent control system. These in-house innovations ensure full system integration, enhanced performance, and maximum compatibility across the entire laser cutting process.
Backed by a 5-Year Warranty
All proprietary technologies come with a 5-year warranty, offering our customers long-term reliability, reduced maintenance concerns, and complete peace of mind. With Bodor, you get cutting-edge technology and unmatched confidence in every component.
Laser Scanning Cutting Brings A Revolution
Traditional Cutting
Low energy absorption rate within the cutting area.
Scanning Cutting
High energy absorption rate within the cutting area.
Laser Scanning Cutting Diagram
Fearless High-Reflective Sheets
When cutting high-reflective sheets, it is unaffected by any back reflection, enabling true batch processing of these materials.
MANGO — Wireless Controller in High Demand
Enjoy one-handed operation with a comfortable grip and the flexibility to attach the controller directly to sheet metal. MANGO merges IoT functionality with cutting-edge design for the ultimate in user-friendly control.
SPECIFICATIONS
| Model | A6T | A4T | A3T |
| Working field, mm | 6100х1524 | 4000х1524 | 3048х1524 |
| Machine dimensions (L x W x H), mm | 7900 х 3200 х 2000 | 5600 х 3200 х 2000 | 5600 х 3200 х 2000 |
| Laser power, W | 3000/2000/1500/1000 | ||
| Positioning accuracy, mm | 0,05 | ||
| Repeat positioning accuracy, mm | 0,03 | ||
| Maximum speed, m/min | 100 | ||
| Acceleration | 1G | ||
| Tube cutting module, mm | 3000/6000 | ||
| Tube diameter, mm | 20 – 220 (360 optional) | ||
| Import file formats | G file, DXF, DWG, PLT, ENG | ||
VIDEO
DESCRIPTION
Fiber laser machines with a fixed working surface and a fully welded milling machine for cutting sheet metal and pipes.
BODOR AT series standard equipment:
- Fiber laser source Maxphotonics or IPG PHOTONICS
- All-welded milled bed
- Cabinet Protection
- Interchangeable tables
- Turning device for tubes and profiles
- Bodor Genius laser head with autofocus
- Radar 360 for automatic detection cases
- Bodor THINKER 3.0 software
- The ergonomic MANGO control panel
- Servo motors Schneider, France
- Electrical components Schneider, France
- Helical rack Leitesen, Germany
- Lap guides, Taiwan
- Proportional valve oxygen and nitrogen SMC, Japan
- Circuit breaker France Schneider
- Automatic lubrication
- Triple drive protection system
- Emergency pressure sensor function
- WiFi data transfer
- Water chiller S&A
- Extraction system
- Trolleys
- Spare parts kit
AT SERIES DESIGN FEATURES
ALL-WELDED MILLED BED
Use a robust tongue and groove design for greater load bearing capacity. Solder joint fixation and load-bearing structure ensure long-term stability. Welded construction absorbs shock better, reduces deflection caused by impact, and provides more precise cutting.
CUTTING HEAD BODOR GENIUS (with autofocus)
| Cutting head parameters: | |
| source power | 0-6000 Wt |
| focal length collimating lens | 100 mm |
| focal length focus lens | 125 mm/150 mm/200 mm |
| lens diameter | D30 mm (0-3kw), D37mm (0-4kw) |
| vertical autofocus adjustment range | +10 mm -15 mm |
| horizontal autofocus range | ±1.5 mm |
| maximum compressed air pressure | 25 Bar |
| weight | 4.2 kg |
AUTOFOCUS
- Applicable to various focal lengths that are under the control of the machine control system.
- The focusing point is automatically adjusted during operation to achieve the best cutting effect on metal sheets of various thicknesses.
- The focal length is controlled by the operating system. There is no need to adjust adjustments manually, thus avoiding errors or failures caused by manual operation.
- The electric drive automatically adjusts the most suitable focal points in the workflow, which greatly improves the cutting speed.
- The laser head receives from the settings library the parameters that are stored in the system.
- Built-in channels with dual cooling circuits ensure a constant temperature of the collimating and focusing components, avoiding lens overheating and extending lens life.
RADAR 3600 FOR AUTOMATIC OBSTACLES DETECTION
The new generation BODOR laser head is equipped with an obstacle detection system to avoid collisions with workpieces.
- No risk of head hitting an obstacle, no risk of costly repairs.
- You no longer need to put 0.1 mm jumpers, 4-5 pieces per workpiece:
a) simplifies the work of the operator and eliminates the risk of human error,
b) increases processing speed,
c) improves the quality of the edge surface
d) it is not necessary to manually break out the blanks from the sheet after cutting, removing the jumpers. - BODOR in the basic configuration, for analogues – an option for an additional fee of ≈ $ 20,000.
21.5″ COLOR MACHINE CONTROL DISPLAY AND PANEL
SOFTWARE
 |
BODOR THINKER 3.0 SYSTEMThe machine was controlled by a professional industrial computer using a graphical interface and professional cutting software. Free design of all kinds of graphics, data processing in the time environment, support for CAD, CorelDraw and other professional graphics programs. Simplicity and convenience for the operator. |
YASKAWA SERVO MOTORS AND SCREW
CAST PORTAL 3rd GENERATION AVIATION ALUMINUM
Heavy duty cast aluminum gantry allows travel speeds of up to 100 m/min. and 1G acceleration. The lightweight and durable gantry enables BODOR lasers to operate at high speeds, increase equipment efficiency and ensure flawless cutting quality.
DOUBLE AUTOMATIC CENTERING ELECTRIC CHUCKS
Dual electric chucks with automatic centering function are easy to operate and require little maintenance. An all-new motor provides precise control. Modular cartridge components are developed independently and can be quickly replaced.
Diameter of round pipes from 20 mm to 230 mm. Section of profile pipes from 20×20 mm to 160×160 mm. Automatic pipe cutting module 3000 mm (6000 mm) depending on the configuration.
SPECIAL SETTINGS for cutting U-profile and angle in the pipe cutting module
SHEET POSITION FUNCTION
This function allows you to automatically determine the positional projections and the angle of rotation of the workpiece on the machine table and adjust the cutting program if necessary. If the material is not level on the pallet, then the edges of the material will be detected using the detector, and the material will be programmatically rotated to the required coordinates.
PNEUMATIC COMPONENTS SMC (JAPAN)
NSK BEARINGS (JAPAN)
CHILLER (WATER) S&A
LASER SOURCE (RESONATOR) MAXPHOTONICS or IPG PHOTONICS
Resonator Maxphotonics – this is a 2 year warranty and service in the Baltic countries. Optical protection system for aluminum cutting, galvanizing, mirror precision steel. High beam quality on all power batteries. The service life of the diodes is 100,000 hours.
Resonator IPG Ротоника – this is a 2 year warranty, production and service in the Baltic countries. Optical protection system for aluminum cutting, galvanizing, mirror precision steel. High beam quality on all power batteries. The service life of the diodes is 100,000 hours.
SPECIFICATIONS
| Model | A6T | A4T | A3T |
| Working field, mm | 6100х1524 | 4000х1524 | 3048х1524 |
| Machine dimensions (L x W x H), mm | 7900 х 3200 х 2000 | 5600 х 3200 х 2000 | 5600 х 3200 х 2000 |
| Laser power, W | 3000/2000/1500/1000 | ||
| Positioning accuracy, mm | 0,05 | ||
| Repeat positioning accuracy, mm | 0,03 | ||
| Maximum speed, m/min | 100 | ||
| Acceleration | 1G | ||
| Pipe cutting module, mm | 3000/6000 | ||
| Pipe diameter, mm | 20 – 220 (360 optional) | ||
| Import file formats | G file, DXF, DWG, PLT, ENG |
